Huayang Slot drawing thermal bonding production line
Complete slot-drawing PET spunbond thermal-bonding nonwoven production line.
PET Spunbond line · HUAYANG
Tubular drawing thermal bonding production line
Complete tubular-drawing PET spunbond thermal-bonding nonwoven production line.
- Authorized representative
- Install & maintain in Vietnam
- 12-month warranty
- Raw materials
- PET chips、PLA chips
- Product specification
- 20－240g/m²
- Denier
- 1.0-4.0dpf
- Production speed
- 5-70m/min
Contact for a quote quoted by configuration
Overview
Product overview
The tubular drawing thermal bonding production line is a spunbond nonwoven line built to produce thermally bonded fabric using tubular filament drawing.
It works on the spunbond principle: PET or PLA chips are melt-spun into continuous filaments by tubular air drawing, laid into a web, then consolidated by heat with no chemical binder. Forming continuous filaments directly into the web yields even coverage and consistent strength. The finished fabric offers high tensile strength, a small transverse-to-longitudinal strength ratio, good dimensional stability, aging resistance and corrosion resistance, suiting gas, liquid and composite filter media, building reinforcement, household textiles, clothing interlining, floor-leather base cloth, shed-cover materials and packaging. Tubular drawing covers a wide basis-weight range of 20–240g/m² at 1.0–4.0dpf and 5–70m/min, favoring heavier and medium-weight fabrics. The line comes in three work widths of 1.6m, 2.4m and 3.2m for outputs of 1,500, 2,200 and 3,000 tonnes per year.
Vina Nonwoven is the authorized Huayang representative in Vietnam, advising on line configuration by work width and target output, with installation, commissioning and warranty support.
Technical specs
Configuration & specifications
Raw materials PET chips、PLA chips
Product specification 20－240g/m²
Denier 1.0-4.0dpf
Production speed 5-70m/min
Drawing type Tubular air drawing
Equipment work-width series
| Work width | Capacity |
|---|---|
| 1.6m | 1500t/y |
| 2.4m | 2200t/y |
| 3.2m | 3000t/y |
Applications
Highlights & applications
- Gas and liquid filter materials or composite filter materials
- Building reinforcement and household textiles
- Clothing interlining and floor-leather base cloth
- Shed cover materials and packaging materials
Q & A
Frequently asked questions
What raw materials can this line run?
The line runs both PET chips and PLA chips (bio-based resin), using tubular air drawing.
What is the thermal-bonded nonwoven from this line used for?
The fabric is mainly used as gas/liquid filter or composite filter material, building reinforcement, household textiles, clothing interlining, floor-leather base cloth, shed/greenhouse cover materials and packaging.
What weight, denier and production speed does the line cover?
It covers 20–240 g/m² fabric weight, 1.0–4.0 dpf denier, at a production speed of 5–70 m/min.
What work widths and capacities are offered?
Three work widths: 1.6 m (1,500 t/y), 2.4 m (2,200 t/y) and 3.2 m (3,000 t/y).
Should I choose the tubular-drawing or the slot-drawing thermal-bonding line?
Choose by the fabric weight you need and by throughput. The tubular line (this one) runs 20–240g/m² at 1.0–4.0dpf and 5–70m/min, for 1,500, 2,200 and 3,000 t/y at widths of 1.6m, 2.4m and 3.2m. The slot line makes lighter fabric (10–150g/m²) from finer filament (1.0–3.0dpf) and runs much faster (15–150m/min), so across those same three widths it reaches 2,400, 3,700 and 5,000 t/y. For fabric up to 240g/m², take the tubular line; for light fabric at high volume, the slot line.
How can I get consultation and a quote for this line?
Vina Nonwoven is Huayang's representative in Vietnam and can advise on the right configuration and provide a quote based on your specific requirements — reach out via hotline or Zalo.
Huayang 
Huayang PET spunbond substrate fabric production line
Complete production line for high-strength PET spunbond substrate fabric used as the tire for modified-asphalt waterproof membranes.
Huayang PET spunbond geotextile production line
Complete production line for PET spunbond needle-punched geotextile used across modern construction and infrastructure projects.
Request a quote
Get configuration advice & a quote within 24h
Leave your details — our engineers will contact you for a free consultation on the line that fits your product and capacity.
⚡ Average response < 2 working hours